Chemical Adsorbents Zeolite 4A Molecular Sieve Desiccant For Truck Pneumatic Brake

Product Description of 4A Molecular Sieve Desiccant

Molecular sieves for automotive brakes are mainly used for drying of pneumatic braking systems such as automobiles, heavy trucks, trains and boats, including the removal of moisture in automobile air conditioning systems and air brake braking systems. Moisture in the pneumatic system will corrode the pipeline and affect the braking effect, and even lead to the failure of the braking system in severe cases. Therefore, it is necessary to pay attention to regularly draining the accumulated water in the system and to replace the molecular sieve dryer regularly. If any problems are found, replace it in time. Molecular sieves for automobile brakes produced by Lvneng LTD have the characteristics of good chemical compatibility, high adsorption capacity, high crushing strength, low dust degree, and high dry and wet wear capacity.

Technical Description

In the motor vehicle air brake system, due to the frequent changes of the compressed air, the air temperature drops, causing water accumulation in the brake air path, which in turn causes the metal components in the brake system to corrode, resulting in cracks in the rubber seals and dispersion of lubricating grease. Failure, pipeline blockage and other failures, seriously affect the safety of driving, in order to solve this problem.

In recent years, the use of compressed air drying devices, the compressed air dryer, has been gradually promoted at home and abroad. It is installed in the vehicle brake air circuit, and the dryer is filled with air-drying molecular sieves to dry the compressed air. Efficacy and safety of air brake systems.

The special desiccant for the vehicle brake air circuit can be used as the compressed air desiccant in the motor vehicle air brake system to protect the brake air circuit and avoid the occurrence of safety accidents.

This product not only absorbs the moisture in the compressed air, but also makes the compressed air of the desiccant in the regeneration air storage cylinder pass through the desiccant in the reverse direction, taking away the moisture adsorbed on the surface of the desiccant and discharging into Atmosphere for regeneration.

Application


Technical Specification of 4A Molecular Sieve Desiccant

Display of 4A Molecular Sieve Desiccant


Package of 4A Molecular Sieve Desiccant


Factory View of 4A Molecular Sieve Desiccant

Attention of 4A Molecular Sieve Desiccant

• The product cannot be exposed in the open air & should be stored in dry condition with air-proof bag.
• It should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.

FAQ of 4A Molecular Sieve Desiccant

Q: Could we send a free sample for reference?
A: Yes, of course.

Q: What about the price and MOQ?
A: We promise a competitive price with top quality, & accept both mass and small quantity order.

Q: What is the lead time?
A: Within 15 days after received payment.

Q: Payment term?
A: 100% TT in advance. or 30% TT deposit & balance before shipment.

Q: How to solve problems after sales?
A: Take photos of the problems. After confirmed, we will make a satisfying solution for you within 3 days.

For More information please contact us. It's our pleasure to serve you.

Xi'an Lvneng Purification Technology Co., Ltd., was relocated to Xi'an from Dalian in November 2004. With more than 20 years of management and development, it becomes a key manufacturer of the special type molecular sieve in China, specializes in molecular sieve, activated alumina, and other industrial desiccants.

Xi'an Lvneng Purification Technology Co., Ltd., relying on the professional background of molecular sieve absorbent research and development, production and operation for nearly 30 years have rapidly and steadily developed the foreign markets. In September 2012, the company settled in the Weibei industrial area of Xi'an, with a newly built factory of nearly 8,000 square meters, covering an area of more than 10 mu, with nearly 70 employees, 4 technical researchers, perfect inspection equipment and the technology research & development was in the forefront of the industry. With the completion of the new plant, nearly ten million yuan was invested in the production equipment and the production capacity reached 8,000 tons and its output value has reached over 50 million for two consecutive years. Therefore, it can better meet the sales and operation needs of enterprises.

Xi'an Lvneng Purification Technology Co., Ltd with leading technology and excellent quality as its development objective for many years, has worked closely with Dalian Institute of chemical physics, Chinese Academy of Sciences, Xi 'an institute of high voltage electrical appliances, electrical bureau of machinery industry department, northwest chemical engineering institute, Changqing institute of chemical technology, Daqing petrochemical company and other units to overcome various technical difficulties and steadily improve product quality.

The adsorbent products such as molecular sieve and alumina are widely used in petrochemical, CNG, LNG, industrial gas, compressed air, coal chemical, air separation, refrigeration and construction industries. In particular, with the industrial transformation of the country and the innovation of global industry 4.0, the drying and purification of industrial power gas depend on the upgrading of industrial automation, especially the molecular sieve desiccant.

After 20 years' development in the market, the enterprise still becomes an excellent supplier to a large number of state-owned enterprises, such as Changqing oilfield, Tuha oilfield, Liaohe oilfield, Yanshan petrochemical company, Qingyang petrochemical company, Maoming petrochemical company, China aviation industry group, China shipbuilding industry group and so on. Meanwhile, more than 70% of the adsorbent fillers used in the dehydrated sheath of CNG gas stations in Xinjiang, Shandong, and Hebei regions are our products. In terms of new market development, Xi'an Lvneng Purification Technology Co., Ltd develops foreign trade rapidly and stable on the basis of the strong domestic trade market.

Through Alibaba (China), Kompass (France), Global Sources (the United States), Tendata (Europe), Avention(Europe) and other foreign trade platforms, we have developed a wide range of foreign customers. Currently, our customers are all over Asia, Europe, North America and South America. Alstom (France), Xebec (Canada), Atlas Copco (USA), Danfoss (Denmark), Zarrin Toor Felez (Iran), Saral Azar (Iran) Bhogart LLC (USA), Socane (France), Petro Kimya Akam (Iran), Atlas Caspian (Iran), HD Trading Company (Iran), and Seraj Gostar (Korea), Bioversity (India), etc. Under the efforts of the foreign trade team, the sales revenue of 1.6 million us dollars per year was realized on average in three years, and the special fund of foreign trade subsidy from the provincial department of commerce was obtained for two consecutive years.

Inherit the past and forge ahead into the future, as northwest China's biggest molecular sieve adsorbent manufacturer, leading technology, excellent quality, customized service is our tenet, through the industry-leading new production line, mechanization degree is maximum improved, make our enterprise to adapt to the market and service market better. Thus achieve the sustainable and steady development of enterprises, casting the next brilliant enterprises.